(Forgot your password?)?
Industry Activities 

IFE 2023 Preshow Feature- A-Stainless International Double Spiral, Square Thread, Triple Thread Screws

A_Stainless_International_screw_8414_0.jpg
Add to my favorite
2023-07-18
Booth No. 663
 
     A-Stainless in partnership with their factory Fastex Industry Co., Ltd in the last 23 years has introduced a series of innovative screw products to the fasteners market. They first introduced the Square Thread Screws that feature very low driving torque for hard wood, metal, plastic and concrete applications. This type of thread form back in 2000 was a very new concept, the very first of its kind in the market place that soon fetched market footholds in North America, Europe, Australia and Japan.
 
     The square thread they have learned over the years besides being good for hard wood is best suited for metal applications. In the case of aluminum window frames, the driving torque reduction is well above 50 % which is significant enough to do away with head breaking problems when Austenitic, i.e., 304, 305 , 316 (A2 or A4) tapping screws are used for aluminum windows.
 
     Two years after the Square Thread Screws, they introduced the Double Spiral Screws, also meant for hard wood applications, again featuring a general 30-40 % drive-in torque reduction verses the regular Type 17 thread cutting screws. In the same year they came up with the Triple Thread Composite Decking Screws, a much improved version over what was available in the market then. Their version has a small trim head with triple threads, i.e.., 3 portion threads of left, right and left thread design. The trimmed small head ensures that the screw head sits flush against the surface of the composite decking while the triple threads compress the plastic spiral waste materials from emerging, i.e., kept under the decking. Built on the square, double spiral and triple thread styles, they have used these variables to come up with various screw versions to suit the specific needs and requirements of their customers.
 
     In the last three years, they have had the latest product, namely the Milled Point Self Drilling Screws made with milling machines deigned and made by their team. They have chosen to make the 6–cut milled point instead of the regular forged point for reasons of the very neat, sharp and consistent cutting blades. The milled point is preferred due to its stability and consistency while drilling thicker metal sheets that require No. 4 or No. 5 drill points. 
 
     A-Stainless is committed to making special screw parts for a wide spectrum of different applications where special attention pertaining to thread designs, work hardening, heat treatment, plating and coating needs to be taken. They welcome inquiries especially those that call for specific performing features.
 
Contact: General Manager Asser Liu   
A-Stainless International
Double Spiral
Square Thread
Triple Thread Screws
low driving torque
hard wood
metal
plastic
concrete applications
扣件
國際展會
惠達雜誌
匯達實業
外銷媒合
廣告刊登
螺絲五金
五金工具
紧固件
台灣扣件展
印度新德里螺絲展
越南河內螺絲展
墨西哥瓜達拉哈拉螺絲展
美國拉斯維加斯螺絲暨機械設備展
波蘭克拉科夫螺絲展
義大利米蘭螺絲展
德國司徒加特螺絲展
wire Dusseldorf
FASTENER FAIR INDIA
FASTENER FAIR VIETNAM
FASTENER FAIR MEXICO
FASTENER POLAND
FASTENER FAIR ITALY
FASTENER FAIR GLOBAL
FASTENER WORLD
Save and share